Page 1 of 1

357 maximum Brass Needed

Posted: Thu Apr 28, 2016 12:40 am
by Oldfart
Like the title says I'm looking for 357Maximum brass new and or once fired. L-) :-?

Re: 357 maximum Brass Needed

Posted: Thu Apr 28, 2016 7:35 am
by Coogs
See Midway is out of it. I don't have any to part with, just enough as the man says. Good luck in your quest. If no luck here, try a post over at cast boolits. Coogs.

Re: 357 maximum Brass Needed

Posted: Thu Apr 28, 2016 8:12 am
by wheelgun7360
Rem is no longer making brass. I got some max brass. Best to call around 6:00 pm 601-624-2868 allen

Re: 357 maximum Brass Needed

Posted: Thu Apr 28, 2016 8:20 am
by LOCKHART
Remington only makes one batch per year. Try Natchez shooters supply. I bought 300 pieces from them last year and unlike Midway, Natchez doesn't limit the amount you can buy.

Re: 357 maximum Brass Needed

Posted: Thu Apr 28, 2016 9:07 am
by 260 Striker
Try Mike Bellm at Bellm's TC. This is one of their favorite cartridges and they got a big supply in a couple of months ago. Might be gone by now but worth a try.

Re: 357 maximum Brass Needed

Posted: Thu Apr 28, 2016 11:26 pm
by jmoore
I found a couple of hundred pieces a month or so ago. Jamison brand I think. Can't remember immediately who had it.

ETA: Probably Grafs, but they're out.

Re: 357 maximum Brass Needed

Posted: Fri Apr 29, 2016 9:08 am
by LOCKHART
It's hard to believe that Starline doesn't make this. They make brass for some of the goofiest calibers out there, like the .356 for Dan Wesson revolvers! Like who uses THAT??

Re: 357 maximum Brass Needed

Posted: Sun May 01, 2016 10:13 am
by dhagerty40x
If you cannot find new or once fired brass, I do have some that has less than 5 firings on it and will let it go fairly cheap.

Re: 357 maximum Brass Needed

Posted: Wed May 18, 2016 6:23 pm
by Oldfart
I found a couple hundred enough to get me started ;) :ymhug:
It ain't cheap but what I did find is new :D