ihmsa forums

I just got a big bag of Peterson 7mm BR brass. Weighed 100 random cases and found .6 grain variation. 10x better than what I typically find with Remi. brass.

I just sold my 1100 pieces of new Remington 7mm br brass. Going to replace it with the Peterson brass. It better be superior to Remington as much as it cost!! Mine should be here next Wednesday! Allen

SSK (lehigh defense) also now sells 7br brass.

https://sskfirearms.lehighdefense.com/a ... brass-case

nutcase wrote: Sat May 02, 2020 4:22 pm SSK (lehigh defense) also now sells 7br brass.

https://sskfirearms.lehighdefense.com/a ... brass-case

I think that's Peterson brass.

mmcwillis wrote: Sun May 03, 2020 9:31 am

nutcase wrote: Sat May 02, 2020 4:22 pm SSK (lehigh defense) also now sells 7br brass.

https://sskfirearms.lehighdefense.com/a ... brass-case

I think that's Peterson brass.

It is. the only place you can get peterson brass that I know of are from Graf & sons or from SSK.

I have a caveat. Make sure your decapping pin is .062 as the Peterson brass has .065 flash holes and some dies have .080 pins.

I will check it ! Thanks for the info! Allen

mmcwillis wrote: Mon May 04, 2020 10:22 pm I have a caveat. Make sure your decapping pin is .062 as the Peterson brass has .065 flash holes and some dies have .080 pins.

Lapua brass is the same size flash hole also.

My brass came today. Brass is 10 times better than the Remington!! Ordered some more from SSK. Allen