7MM Supermag Brass FS - SOLD
Posted: Sat Apr 09, 2022 9:32 pm
SOLD
I have 200 pieces of 7MM Supermag brass for sale.
150 of these have been sized, decaped, and primer pockets cleaned and are in a bag marked "2 Fired" - they are ready to load.
Another 50 pieces are as follows:
45 pieces sized, decaped, primer pockets cleaned and primed with Remington 7 1/2 Small Rifle benchrest primers - ready to load if you like that primer.
The other 5, just like that, except they have been loaded and fired.
There was no note with the 50 primed pieces how many times they had been fired but I will guess twice since I try to use my brass uniformly.
These cases were formed from Remington .357 Maximum brass after annealing the case mouths.
Asking $50 plus shipping cost. Since some cases are primed, these must be shipped via UPS or FedEx so shipping costs will vary by destination.
I can take pictures for anyone interested.
This will be only my second sale on this forum, but you can check my feedback on eBay under blue_bird71, and RCTech.net under ta_man.
Contact => mark.st -at- ta455 -dot- net
I have 200 pieces of 7MM Supermag brass for sale.
150 of these have been sized, decaped, and primer pockets cleaned and are in a bag marked "2 Fired" - they are ready to load.
Another 50 pieces are as follows:
45 pieces sized, decaped, primer pockets cleaned and primed with Remington 7 1/2 Small Rifle benchrest primers - ready to load if you like that primer.
The other 5, just like that, except they have been loaded and fired.
There was no note with the 50 primed pieces how many times they had been fired but I will guess twice since I try to use my brass uniformly.
These cases were formed from Remington .357 Maximum brass after annealing the case mouths.
Asking $50 plus shipping cost. Since some cases are primed, these must be shipped via UPS or FedEx so shipping costs will vary by destination.
I can take pictures for anyone interested.
This will be only my second sale on this forum, but you can check my feedback on eBay under blue_bird71, and RCTech.net under ta_man.
Contact => mark.st -at- ta455 -dot- net