Building An Unlimited Encorein 7mmBR.

[maxxis35]

I want to build a gun for the unlimited any sight class on a budget. I already own an encore frame, so the barrel will tbe the main expense. I want it in 7mmBr and am leaning towards a 12 inch length in a straight bull profile. The loss of sight radius wont be an issue since the gun will be scoped. I am thinking the short stiff barrel may be more inherrently accurate. Is this a good assumption, or go with a slimmer profile and 14 inch length.?

[19 Turkeys]

I do not have the answer to your question, but the shorter barrel will mean that you have 2 inches less barrel in which to burn powder which could cause some loss of burning efficiency.

Steve W.

[maxxis35]

Any comments on the hinge pin lockers,do they help tighten the action and improve accuracy?

[maxxis35]

Any comments on the hinge pin lockers,do they help tighten the action and improve accuracy?

[sgtrock965]

I had great success with a Shilen SS match grade barrel (15" taper) in 7mm International. Old school, but it worked for me way back when. My eyes could keep 5 rounds in a 2" group on the rams - then. Now? Maybe 2 foot.

[maxxis35]

I decided to go with the 14 inch barrel. I did stick with the 7mmbr. I did manage to locate some brass at Midway. E A Brown is building the barrel. I have a ten inch Encore in 7TC. I shot back in the 80's and want to try again with a anysight gun since my eyes ain't what they used to be. Any tips would be appreciated. I am sitting home nursing a knee replacement.